Network Patch chord Cable: Link Basic Brand. ● 6-50 micron RJ-45 staggered gold plated connectors for best transmission. ● Fitted with strain relief boots with asthetic finishing. ● With or without reports made to the order for the clients. ● 100% Tested Wiring Sequence and Continuity  which guarantees no faults. ● Excellent Attenuation and Crosstalk Characteristics for your strong Network Stability. ● Connector with staggered pin configuration to limit cross talk which makes it different then others same type products. ● Exceed Category 6 requirement meets the Network Infrastructures. ● They are available in a variety of the lengths depending on your requirements. Physical Characterstics: > Conductor: 23 AWG bare copper > Insulation material: PE Outer shield: AL Foil > Jacket for RJ45 plug: PVC or LSZH > Material for RJ45 plus: PC polycarbonate > Flame test: CM or CMR Dielectric strength:   1,000V RMS 60Hz/1min Voltage Class(maximum):  150VAC Rated current(maximum):   1.5A Insulation resistance(minimum):  500megohm Contact resistance(maximum):   10milliohm